Improving high-temperature stability of perovskite solar cells

A perovskite solar module with an active area of 22.0 cm2 containing fluorinated aniliniums for interfacial passivation - 2023 EPFL/Cheng Liu, Northwestern University - CC-BY-SA 4.0

A perovskite solar module with an active area of 22.0 cm2 containing fluorinated aniliniums for interfacial passivation - 2023 EPFL/Cheng Liu, Northwestern University - CC-BY-SA 4.0

Researchers at EPFL, the University of Toronto, and the University of Kentucky have found a way to significantly improve the operational stability of perovskite solar cells at high temperatures, which is necessary for their use in terawatt power grids.

Perovskite solar cells (PSCs) have gained attention for their high power-conversion efficiencies and low-cost solution processing. However, ensuring their stability at high temperatures has been a challenge, as the points of contact between their different layers (“interfaces”) are susceptible to degradation, leading to energy loss and decreased performance.

In a new study, researchers have found that they can minimize PSC degradation at high temperatures by using fluorinated aniliniums, a class of compounds used in pharmaceuticals, agrochemicals, and materials science. The study was led by Michael Grätzel at EPFL, Edward Sargent at the University of Toronto, and Kenneth Graham at the University of Kentucky. It is published in Science.

The researchers incorporated fluorinated aniliniums in the “interfacial passivation” step of PSC fabrication. Interfacial passivation is a technique used to enhance the stability and performance of interfaces between different layers or materials to minimize defects, reduce charge recombination, and improve overall efficiency and stability.

Adding fluorinated aniliniums enhanced the stability of PSCs by avoiding progressive ligand intercalation. This prevented the continuous penetration of ligand molecules between the layers or structures of the perovskite material, which destroys the integrity of the crystals, leading to degradation and decreased performance of PSCs.

Using this approach, the scientists achieved a certified quasi-steady-state power-conversion efficiency of 24.09% for inverted-structure PSCs. When they tested an encapsulated PSC – a device within a protective enclosure – at a temperature of 85°C, 50% relative humidity, and 1-sun illumination (the intensity of sunlight under normal, clear-sky conditions at solar noon), the device worked at its maximum power generation for an impressive 1560 hours (~65 days) while maintaining its functionality and efficiency.

The study is a major contribution to PSC stability and offers a potential solution for enhancing their performance, durability, and reliability in high-temperature environments, bringing us closer to the terawatt-scale deployment of this promising photovoltaic technology.

Other contributors

  • North Carolina State University
  • Northwestern University
Funding

US Department of the Navy (Office of Naval Research)

Ontario Research Fund

US Department of Energy

US National Science Foundation

European Union’s Horizon 2020 Research and Innovation program

Northwestern University (MRSEC program)

References

So Min Park, Mingyang Wei, Jian Xu, Harindi R. Atapattu, Felix T. Eickemeyer, Kasra Darabi, Luke Grater, Yi Yang, Cheng Liu, Sam Teale, Bin Chen, Hao Chen, Tonghui Wang, Lewei Zeng, Aidan Maxwell, Zaiwei Wang, Keerthan R. Rao, Zhuoyun Cai, Shaik M. Zakeeruddin, Jonathan T. Pham, Chad M. Risko, Aram Amassian, Mercouri G. Kanatzidis, Kenneth R. Graham, Michael Grätzel, Edward H. Sargent. Engineering ligand reactivity enables high-temperature operation of stable perovskite solar cells. Science 14 July 2023. DOI: 10.1126/science.adi4107


Author: Nik Papageorgiou

Source: EPFL

This content is distributed under a Creative Commons CC BY-SA 4.0 license. You may freely reproduce the text, videos and images it contains, provided that you indicate the author’s name and place no restrictions on the subsequent use of the content. If you would like to reproduce an illustration that does not contain the CC BY-SA notice, you must obtain approval from the author.